Regulation No. 39-01 Proposal

Name:Regulation No. 39-01 Proposal
Description:Speedometer. Proposal for the 01 Series.
Official Title:Proposals for the 01 Series of Amendments to Regulation No. 39 (Speedometer).
Country:ECE - United Nations
Date of Issue:2015-08-24
Amendment Level:Original
Number of Pages:6
Information:Published as Regulation No. 39-01
Vehicle Types:Bus, Car, Heavy Truck, Light Truck, Motorcycle
Subject Categories:Drafts and Proposals (Historical)
Available on InterRegs.NET

Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.

Tell me more | Already a subscriber

Available on SelectRegs.com

Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.

Tell me more | Go straight to site

Keywords:

vehicle, regulation, approval, type, odometer, speedometer, series, amendments, equipment, read, paragraphs, vehicles, granted, including, number, amend, paragraph, means, approvals, regard, installation, date, applying, pursuant, requirements, numerals, approved, service, contracting, mark, entry, grant, accept, technical, fitted, refuse, integer, insert, manufacturer, composed, submitted, categories, display, description, issued, parties, force, min, model, affixed

Text Extract:

All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.

ECE/TRANS/WP.29/2015/83
PROPOSAL FOR THE 01 SERIES
OF AMENDMENTS TO
REGULATION NO. 39
(SPEEDOMETER)
ADOPTED AT THE 167 SESSION – NOVEMBER 2015
PROVISIONAL DATE OF ENTRY INTO FORCE: JUNE 18, 2016

Paragraphs 3.1. to 3.2.1., amend to read:
"3.1. The application for approval of a vehicle type with regard to the speedometer and odometer
equipment including its installation shall be submitted by the vehicle manufacturer or by his
duly accredited representative.

3.2.1. A description of the vehicle type with regard to the items mentioned in Paragraphs 2.2., 2.3.,
2.4., 2.5. and 2.6. above; the vehicle type shall be specified."
Paragraph 4.1., amend to read:
"4.1. If the vehicle type submitted for approval pursuant to this Regulation meets the
requirements of the Regulation in respect of the speedometer and odometer equipment
including its installation, approval of that vehicle type shall be granted."
Insert a new Paragraph 5.1., to read:
"5.1. An onboard speedometer and odometer complying with the requirements of this Regulation
shall be fitted to the vehicle to be approved."
Paragraphs 5.1. to 5.3. (former), renumber as Paragraphs 5.2. to 5.4.
Insert new Paragraphs 5.5. and 5.5.1., to read:
"5.5. The display of the odometer shall be visible or accessible to the driver. The odometer shall
display at least an integer number composed of a minimum of 6 numerals for the vehicles of
Categories M and N, and at least an integer number composed of a minimum of 5 numerals
for the vehicles of Category L. Nevertheless, the Type Approval Authorities may also accept
an integer number composed of at least 5 numerals for the vehicles of categories M and N if
the intended use of the vehicle justifies it.
5.5.1. In the case of vehicles manufactured for sale in any country where imperial units are used,
the odometer shall be marked in miles."
Insert new Paragraphs 10. to 10.4., to read:
"10. TRANSITIONAL PROVISIONS
10.1. As from the official date of entry into force of the 01 series of amendments, no Contracting
Party applying this Regulation shall refuse to grant or refuse to accept type approvals under
this Regulation as amended by the 01 series of amendments.
10.2. As from September 1, 2017, Contracting Parties applying this Regulation shall grant new
type approvals only if the vehicle type to be approved meets the requirements of this
Regulation as amended by the 01 series of amendments.
10.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type
approvals for existing types which have been granted according to the preceding series of
amendments to this Regulation.

5.3. Ratio of speedometer equipment: ...................................................................................................
6. Description of the odometer equipment: ........................................................................................
7. Mass of vehicle as tested and its distribution between the axles:
........................................................................................................................................................
8. Variants: .........................................................................................................................................
9. Vehicle submitted for approval on: ..................................................................................................
10. Technical service responsible for conducting approval tests: .........................................................
........................................................................................................................................................
11. Date of report issued by that service: .............................................................................................
12. Number of report issued by that service: ........................................................................................
13. Approval granted/refused/extended/withdrawn
14. Position of approval mark on the vehicle: .......................................................................................
15. Place: ..............................................................................................................................................
16. Date: ................................................................................................................................................
17. Signature: ....................................................................................................................................... "

Speedometer. Proposal for the 01 Series.