Regulation No. 3-02 Proposed Supplement 17

Name:Regulation No. 3-02 Proposed Supplement 17
Description:Retro-reflecting Devices. Proposed Supplement 17 to the 02 Series.
Official Title:Proposal for Supplement 17 to the 02 Series of Amendments to Regulation No. 3 (Retro-reflecting Devices).
Country:ECE - United Nations
Date of Issue:2016-12-16
Amendment Level:Original
Number of Pages:4
Vehicle Types:Agricultural Tractor, Bus, Car, Component, Heavy Truck, Light Truck, Motorcycle, Trailer
Subject Categories:Drafts and Proposals (Current)
Available on InterRegs.NET

Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.

Tell me more | Already a subscriber

Available on SelectRegs.com

Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.

Tell me more | Go straight to site

Keywords:

paragraph, retro-reflectors, sample, deviation, retro-reflecting, samples, sampling, approval, regulation, specimen, procedure, requirements, contested, mass-produced, conformity, marked, device, annex, renumber, specifications, type, read, withdrawn, applied, series, amendments, test, amend, case, reflectors, manufactured, verification, resistance, repeated, alignment, random, selected, penetration, water, paragraphs, sections, general, supplement, time, devices, proposal, force

Text Extract:

All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.

ECE/TRANS/WP.29/2017/19
PROPOSAL FOR SUPPLEMENT 17 TO THE 02 SERIES OF
AMENDMENTS TO
REGULATION NO. 3
(RETRO-REFLECTING DEVICES)
ADOPTED AT THE 171 SESSION – MARCH 2017
PROVISIONAL DATE OF ENTRY INTO FORCE: OCTOBER 10, 2017

2.2. The conformity of mass-produced retro-reflectors shall be contested if the deviation of at
least one specimen of samples A or B is more than 20%.
The manufacturer shall be requested to bring his production in line with the requirements
(alignment) and a repeated sampling according to Paragraph 3. below shall be carried out
within two months' time after the notification. The samples A and B shall be retained by the
Technical Service until the entire CoP process is finished.
3. First Repeated Sampling
A sample of four retro-reflectors is selected at random from stock manufactured after
alignment.
The first sample of two is marked C, the second sample of two is marked D.
3.1. The conformity of mass-produced retro-reflectors shall not be contested if the deviation of
any specimen of samples C and D (all four retro-reflectors) is not more than 20%.
In the case, that the deviation of both retro-reflectors of sample C is not more than 0%, the
measurement can be closed.
3.2. The conformity of mass-produced retro-reflectors shall be contested if the deviation of at
least
3.2.1. One specimen of samples C or D is more than 20% but the deviation of all specimen of
these samples is not more than 30%.
The manufacturer shall be requested again to bring his production in line with the
requirements (alignment).
A second repeated sampling according to Paragraph 4. below shall be carried out within two
months' time after the notification. The samples C and D shall be retained by the Technical
Service until the entire CoP process is finished.
3.2.2. One specimen of samples C and D is more than 30%.
In this case the approval shall be withdrawn and Paragraph 5. below shall be applied.
4. Second Repeated Sampling
A sample of four retro-reflectors is selected at random from stock manufactured after
alignment.
The first sample of two is marked E, the second sample of two is marked F.
4.1. The conformity of mass-produced retro-reflectors shall not be contested if the deviation of
any specimen of samples E and F (all four retro-reflectors) is not more than 20%. In the
case, that the deviation of both retro-reflectors of sample E is not more than 0% the
measurement can be closed.

Retro-reflecting Devices. Proposed Supplement 17 to the 02 Series.