Regulation No. 50-00 Proposed Supplement 19

Name:Regulation No. 50-00 Proposed Supplement 19
Description:Position, Stop, Direction Indicator Lamps for Mopeds and Motorcycles. Proposed Supplement 19 to the 00 Series.
Official Title:Proposal for Supplement 19 to Regulation No.50 (Position, Stop, Direction Indicator Lamps for Mopeds and Motorcycles).
Country:ECE - United Nations
Date of Issue:2016-12-20
Amendment Level:Original
Number of Pages:3
Vehicle Types:Component, Motorcycle
Subject Categories:Drafts and Proposals (Current)
Available on InterRegs.NET

Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.

Tell me more | Already a subscriber

Available on SelectRegs.com

Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.

Tell me more | Go straight to site

Keywords:

lamp, type, lamps, paragraph, filament, non-replaceable, approval, read, light, source, requirements, mark, case, documentation, trade, manufacturer, colour, regulation, iec, edition, insert, amend, module, position, voltage, produced, direction, compliance, indicator, specifications, equipped, stop, motorcycles, original, sections, general, supplement, proposal, version, rated, report, marking, range, approved, types, coated, endurance, conformity, force, differing

Text Extract:

All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.

ECE/TRANS/WP.29/2017/28
PROPOSAL FOR SUPPLEMENT 19 TO THE ORIGINAL VERSION OF
REGULATION NO. 50
(POSITION, STOP, DIRECTION INDICATOR
LAMPS FOR MOPEDS AND MOTORCYCLES)
ADOPTED AT THE 171 SESSION – MARCH 2017
PROVISIONAL DATE OF ENTRY INTO FORCE: OCTOBER 10, 2017

Paragraph 6., amend to read:
"6. General Specifications
6.1. …"
The requirements contained in Sections 5. "General Specifications" and 6. "Individual
Specifications" and in the Annexes referenced in the said sections of Regulations Nos. 53
or 74, and their series of amendments in force at the time of application for the lamp type
approval shall apply to this Regulation.
The requirements pertinent to each lamp and to the category/ies of vehicle on which the
lamp is intended to be installed shall be applied, where its verification at the moment of lamp
type approval is feasible.
Insert a new Paragraph 6.6., to read:
"6.6. In the case of non-replaceable filament lamp(s) or light source module(s) equipped with
non-replaceable filament lamp(s), the applicant shall annex to the type approval
documentation a report (by the light source manufacturer indicated in the type approval
documentation), acceptable to the Authority responsible for type approval, that
demonstrates compliance of these non-replaceable filament lamp(s) with the requirements
as specified in Paragraph 4.11. of IEC 60809, Edition 3."
Insert new Paragraphs 10.2. to 10.2.2.2., to read:
"10.2. In the case of non-replaceable filament lamp(s) or light source module(s) equipped with
non-replaceable filament lamps:
10.2.1. A report (by the light source manufacturer indicated in the type approval documentation)
shall demonstrate compliance of these non-replaceable filament lamp(s) with lifetime
requirements and, in the case of colour coated filament lamps, also with colour endurance
requirements, as specified in Paragraph 4.11. of IEC 60809, Edition 3;
10.2.2. At any conformity of production check:
10.2.2.1. The holder of the approval mark shall demonstrate the use in normal production and show
the identification of the non-replaceable filament lamp(s) as indicated in the type approval
documentation;
10.2.2.2. In the case where doubt exists in respect to compliance of the non-replaceable filament
lamp(s) with lifetime requirements and/or, in the case of colour coated filament lamps, with
colour endurance requirements, as specified in Paragraph 4.11. of IEC 60809, Edition 3,
conformity shall be checked (by the light source manufacturer indicated in the type approval
documentation) as specified in Paragraph 4.11. of IEC 60809, Edition 3."
Position, Stop, Direction Indicator Lamps for Mopeds and Motorcycles. Proposed Supplement 19 to the 00 Series.