Regulation No. 69-01 Proposed Supplement 6

Name:Regulation No. 69-01 Proposed Supplement 6
Description:Rear-marking Plates for Slow Moving Vehicles. Proposed Supplement 6 to the 01 Series.
Official Title:Proposal for Supplement 6 to the 01 Series of Amendments to Regulation No. 69 (Rear-marking Plates for Slow Moving Vehicles).
Country:ECE - United Nations
Date of Issue:2016-12-20
Amendment Level:Original
Number of Pages:4
Vehicle Types:Agricultural Tractor, Bus, Car, Component, Heavy Truck, Light Truck, Trailer
Subject Categories:Drafts and Proposals (Current)
Available on InterRegs.NET

Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.

Tell me more | Already a subscriber

Available on SelectRegs.com

Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.

Tell me more | Go straight to site

Keywords:

rear-marking, plates, paragraph, sample, regulation, plate, marked, deviation, amend, read, requirements, sampling, renumber, type, series, amendments, supplement, proposal, contested, random, mass-produced, selected, manufactured, paragraphs, approval, sections, slow, conformity, specimen, samples, case, vehicles, force, general, moving, specifications

Text Extract:

All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.

ECE/TRANS/WP.29/2017/30
PROPOSAL FOR SUPPLEMENT 6 TO THE 01 SERIES OF
AMENDMENTS TO
REGULATION NO. 69
(REAR-MARKING PLATES FOR SLOW MOVING VEHICLES)
ADOPTED AT THE 171 SESSION – MARCH 2017
PROVISIONAL DATE OF ENTRY INTO FORCE: OCTOBER 10, 2017

Annex 14,
Paragraphs 2. to 6., amend to read:
"2. First Sampling
In the first sampling four rear-marking plates are selected at random. The first sample of two
is marked A, the second sample of two is marked B.
2.1. The conformity of mass-produced rear-marking plates shall not be contested if the deviation
of any specimen of samples A and B (all four plates) is not more than 20%.
In the case, that the deviation of both plates of sample A is not more than 0%, the
measurement can be closed.
2.2. The conformity of mass-produced rear-marking plates shall be contested if the deviation of
at least one specimen of sample A or B is more than 20%.
The manufacturer shall be requested to bring his production in line with the requirements
(alignment) and a repeated sampling according to Paragraph 3. below shall be carried out
within two months' time after the notification. The samples A and B shall be retained by the
Technical Service until the entire Conformity of Production process is finished.
3. First Repeated Sampling
A sample of four rear-marking plates is selected at random from stock manufactured after
alignment.
The first sample of two is marked C, the second sample of two is marked D.
3.1. The conformity of mass-produced rear-marking plates shall not be contested if the deviation
of any specimen of samples C and D (all four plates) is not more than 20%.
In the case, that the deviation of both plates of sample C is not more than 0%, the
measurement can be closed.
3.2. The conformity of mass-produced rear-marking plates shall be contested if the deviation of
at least
3.2.1. One specimen of sample C or D is more than 20% but the deviation of all specimen of these
samples is not more than 30%.
The manufacturer shall be requested again to bring his production in line with the
requirements (alignment).
A second repeated sampling according to Paragraph 4. below shall be carried out within two
months' time after the notification. The samples C and D shall be retained by the Technical
Service until the entire Conformity of Production process is finished.
3.2.2. One specimen of sample C or D is more than 30%.
In this case the approval shall be withdrawn and Paragraph 5. below shall be applied.

Rear-marking Plates for Slow Moving Vehicles. Proposed Supplement 6 to the 01 Series.