Regulation No. 70-01 Proposed Supplement 10

Name:Regulation No. 70-01 Proposed Supplement 10
Description:Rear-marking Plates for Heavy and Long Vehicles. Proposed Supplement 10 to the 01 Series.
Official Title:Proposal for Supplement 10 to the 01 Series of Amendments to Regulation No. 70 (Rear-marking Plates for Heavy and Long Vehicles).
Country:ECE - United Nations
Date of Issue:2016-12-19
Amendment Level:Original
Number of Pages:4
Vehicle Types:Bus, Component, Heavy Truck, Trailer
Subject Categories:Drafts and Proposals (Current)
Available on InterRegs.NET

Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.

Tell me more | Already a subscriber

Available on SelectRegs.com

Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.

Tell me more | Go straight to site

Keywords:

plates, sample, paragraph, rear, marking, marked, deviation, sampling, regulation, tests, renumber, conformity, manufactured, mass-produced, amendments, specimens, annex, selected, paragraphs, test, proposal, procedure, amend, long, vehicles, heavy, series, rear-marking, read, case, specimen, contested, pass, samples, random, supplement

Text Extract:

All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.

ECE/TRANS/WP.29/2017/31
PROPOSAL FOR SUPPLEMENT 10 TO THE 01 SERIES OF
AMENDMENTS TO
REGULATION NO. 70
(REAR-MARKING PLATES FOR HEAVY AND LONG VEHICLES)
ADOPTED AT THE 171 SESSION – MARCH 2017
PROVISIONAL DATE OF ENTRY INTO FORCE: OCTOBER 10, 2017

3. First Repeated Sampling
A sample of four rear marking plates is selected at random from stock manufactured after
alignment.
The first sample of two is marked C, the second sample of two is marked D.
3.1. The conformity of mass-produced rear marking plates shall not be contested if the deviation
of any specimen of samples C and D (all four plates) is not more than 20%.
In the case, that the deviation of both plates of sample C is not more than 0%, the
measurement can be closed.
3.2. The conformity of mass-produced rear marking plates shall be contested if the deviation of
at least:
3.2.1. One specimen of sample C or D is more than 20% but the deviation of all specimen of these
samples is not more than 30%.
The manufacturer shall be requested again to bring his production in line with the
requirements (alignment).
A second repeated sampling according to Paragraph 4. below shall be carried out within two
months' time after the notification. The samples C and D shall be retained by the Technical
Service until the entire Conformity of Production process is finished.
3.2.2. One Specimen of Sample C or D is more than 30%.
In this case the approval shall be withdrawn and Paragraph 5. below shall be applied.
4. Second Repeated Sampling
A sample of four rear marking plates is selected at random from stock manufactured after
alignment.
The first sample of two is marked E, the second sample of two is marked F.
4.1. The conformity of mass-produced rear marking plates shall not be contested if the deviation
of any specimen of samples E and F (all four plates) is not more than 20%.
In the case, that the deviation of both plates of sample E is not more than 0%, the
measurement can be closed.
4.2. The conformity of mass-produced rear marking plates shall be contested if the deviation of
at least one specimen of sample E or F is more than 20%.
In this case the approval shall be withdrawn and Paragraph 5. below shall be applied.
5. Approval Withdrawn
Approval shall be withdrawn according to Paragraph 10. of this Regulation.

Rear-marking Plates for Heavy and Long Vehicles. Proposed Supplement 10 to the 01 Series.