Regulation No. 107-07 Proposed Supplement 1
|Name:||Regulation No. 107-07 Proposed Supplement 1|
|Description:||General Construction of M2 or M3 Vehicles. Proposed Supplement 1 to the 07 Series.|
|Official Title:||Proposal for Supplement 1 to the 07 Series of Amendments to Regulation No. 107 (General Construction of Buses and Coaches).|
|Country:||ECE - United Nations|
|Date of Issue:||2016-09-01|
|Number of Pages:||3|
|Subject Categories:||Drafts and Proposals (Historical)|
Available on InterRegs.NET
Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.
Tell me more | Already a subscriber
Available on SelectRegs.com
Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.
Tell me more | Go straight to site
annex, device, class, seat, figure, barrier, force, gauging, monitor, display, iii, read, paragraph, maximum, amend, priority, classes, squab, contact, directions, seats, gauge, vehicle, lift, supplement, testing, proposal, regulation, vehicles, cushion, position, measured, general, point, dimension, case, floor, exceed, applied, construction, amendments, spacing, series, coaches, requirements, buses, minimum, move, number
All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.
PROPOSAL FOR SUPPLEMENT 1 TO THE 07 SERIES OF
REGULATION NO. 107
(GENERAL CONSTRUCTION OF BUSES AND COACHES)
ADOPTED AT THE 170 SESSION – NOVEMBER 2016
PROVISIONAL DATE OF ENTRY INTO FORCE: JUNE 22, 2017
Paragraph 184.108.40.206.3., amend to read:
"220.127.116.11.3. The minimum number of priority seats complying with the requirements of Annex 8,
Paragraph 3.2. shall be four in Class I, two in Class II and one in Class A. In the case of
vehicles of Class III or Class B subject to the requirements of Annex 8, the minimum
number of priority seats shall be two in Class III and one in Class B.
A seat that folds out of the way when not in use shall not be designated as a priority seat."
Annex 4, Figure 12, amend to read:
Seat Spacing …
Testing Gauge for H Dimension (see Annex 3, Paragraph 18.104.22.168.2.)
Thickness of the gauge: 5mm max