Regulation No. 75-00 Proposed Supplement 16
|Name:||Regulation No. 75-00 Proposed Supplement 16|
|Description:||Tyres - Motorcycles and Mopeds. Proposed Supplement 16 to the 00 Series.|
|Official Title:||Proposal for Supplement 16 to the 00 Series of Amendments to Regulation No. 75 (Tyres for L Category Vehicles).|
|Country:||ECE - United Nations|
|Date of Issue:||2016-04-05|
|Number of Pages:||3|
|Information:||Provisional Date of Entry into Force: February 9, 2017|
|Subject Categories:||Drafts and Proposals (Historical)|
Available on InterRegs.NET
Our online subscription service, offering immediate access to our extensive library of global vehicle regulations, standards and legislation. A fully searchable, accurate, user-friendly resource for consolidated regulations that are updated quickly and frequently.
Tell me more | Already a subscriber
Available on SelectRegs.com
Our fast and easy means of purchasing up-to-date global vehicle and component standards and regulations on a pay-as-you-go basis. Pay securely by credit card and your documents are delivered directly and immediately to your computer as PDF files.
Tell me more | Go straight to site
paragraph, tyre, width, section, diameter, outer, nominal, amend, nearest, read, rounded, shown, rim, expressed, annex, millimetre, millimetres, equal, sizes, values, manufacturer, defined, measuring, proposal, obtained, designation, tyres, formula, regulation, amendments, supplement, series, vehicles, l-category
All InterRegs documents are formatted as PDF files and contain the full text, tables, diagrams and illustrations of the original as issued by the national government authority. We do not re-word, summarise, cut or interpret the regulatory documents. They are consolidated, published in English, and updated on a regular basis. The following text extract indicates the scope of the document, but does not represent the actual PDF content.
PROPOSAL FOR SUPPLEMENT 16 TO THE 00 SERIES OF
REGULATION NO. 75
(TYRES FOR L-CATEGORY VEHICLES)
ADOPTED AT THE 169 SESSION – JUNE 2016
PROVISIONAL DATE OF ENTRY INTO FORCE: FEBRUARY 9, 2017
Paragraph 6.1.4., amend to read:
"6.1.4. Tyre Section Width Specification"
Paragraph 126.96.36.199., amend to read:
"188.8.131.52. It may exceed that value up to the value shown in Annex 5 or for sizes not included in
Annex 5 by the following percentages, whereby the limits shall be rounded to the nearest
Paragraph 6.1.5., amend to read:
"6.1.5. Tyre Outer Diameter Specifications
The outer diameter of a tyre must not be outside the values D
184.108.40.206. For sizes not listed in Annex 5 the outer diameter of a tyre must not be outside the
values D and D obtained from the following formulae:
D = d + 2 ⋅ H
D = d + 2 ⋅ H
H = H ⋅ a rounded to the nearest mm
H = H ⋅ b rounded to the nearest mm
H and d are as defined in Paragraph 220.127.116.11. and a and b are as specified in
Paragraphs 18.104.22.168.1. and 22.214.171.124.2. respectively."