Skip to main content

Miscellaneous

Commission Delegated Regulation (EU) 2015/208

Safety Requirements and Approval for Agricultural and Forestry Vehicles.

Commission Delegated Regulation (EU) No. 1322/2014

Approval of Agricultural and Forestry Vehicles.

Commission Regulation (EU) No. 19/2011

Statutory Plate and Vehicle Identification Number.

Commission Regulation (EU) No. 109/2011

Spray Suppression Systems for Motor Vehicles and their Trailers.

Commission Regulation (EU) No. 1003/2010

Mounting Space and Fixing of Rear Registration Plates.

Commission Regulation (EU) No. 1005/2010

Motor Vehicle Towing Devices.

Commission Regulation (EU) No. 1009/2010

Motor Vehicle Wheel Guards.

Commission Regulation No. 1103/2010

Portable Secondary (Rechargeable) and Automotive Batteries and Accumulators Capacity Labelling.

Council Regulation (EC) No. 807/2003

Commission's Implementing Powers.

Directive No. 80/181/EEC

SI Units of Measurement.

Directive No. 2000/53/EC

End-of-life Vehicles - Recycling etc.

Directive No. 2006/66/EC

Batteries and Accumulators.

Directive No. 2009/105/EC

Simple Pressure Vessels.

Directive No. 2014/29/EU

Simple Pressure Vessels.

Directive No. 2014/45/EU

Periodic Roadworthiness Testing.

EN 280-1 : 2022

Mobile Elevating Work Platforms - Part 1 : Design Calculations - Stability Criteria - Construction - Safety - Examinations and Tests.

EN 280-2 : 2022

Mobile Elevating Work Platforms - Part 2 : Additional Safety Requirements for Load Lifting Appliances on the Extending Lifting Structure and Work Platform.

EN 286-1 : 1998

Pressure Vessels - Part 1 : General Purpose.

EN 14492-1 : 2006

Cranes - Power Driven Winches and Hoists - Part 1 : Power Driven Winches.

EN 14492-2 : 2019

Cranes - Power Driven Winches and Hoists - Part 2 : Power Driven Hoists.

EN 60529 : 1992

Electrical Enclosures - Degrees of Protection.

EN ISO 13732-1 : 2008

Temperature of Touchable Surfaces.

EN ISO 13850 : 2015

Emergency Stop Equipment.

EN ISO 19014-2 : 2022

Earth-moving Machinery - Functional Safety - Part 2 : Design and Evaluation of Hardware and Architecture Requirements for Safety-related Parts of the Control System.

EN ISO 19014-3 : 2018

Earthmoving Machinery - Functional Safety - Part 3 : Environmental Performance and Test Requirements of Electronic and Electrical Components Used in Safety-related Parts of the Control System.

EN ISO 19014-4 : 2020

Earthmoving Machinery - Functional safety - Part 4 : Design and Evaluation of Software and Data Transmission for Safety-related Parts of the Control System.

EN ISO 25119-1 : 2023 +A1 : 2023

Tractors and Machinery for Agriculture and Forestry - Safety-related Parts of Control Systems - Part 1 : General Principles for Design and Development.

EN ISO 25119-3 : 2023 +A1 : 2023

Tractors and Machinery for Agriculture and Forestry - Safety-related Parts of Control Systems - Part 3 : Series Development, Hardware and Software.

EN ISO 25119-4 : 2023 +A1 : 2023

Tractors and Machinery for Agriculture and Forestry - Safety-related Parts of Control Systems - Part 4 : Production, Operation, Modification and Supporting Processes.

ISO/DIS 19014-1 : 2024

Earthmoving Machinery - Functional Safety - Part 1 : Methodology to Determine Safety-related Parts of the Control System and Performance Requirements (Draft).

ISO/DIS 19014-2 : 2024

Earth-moving Machinery - Functional Safety - Part 2 : Design and Evaluation of Hardware and Architecture Requirements for Safety-related Parts of the Control System (Draft).

ISO/DIS 19014-4 : 2024

Earthmoving Machinery - Functional safety - Part 4 : Design and Evaluation of Software and Data Transmission for Safety-related Parts of the Control System (Draft).

ISO/TR 12603 : 2010

Building Construction Machinery and Equipment - Classification.

ISO/TS 13725 : 2016

Hydraulic Fluid Power - Method for Evaluating the Buckling Load of a Hydraulic Cylinder.

ISO/TS 19014-5 : 2021

Earth-moving Machinery - Functional Safety - Part 5 : Tables of Performance Levels.

ISO/TS 21815-2 : 2021

Earthmoving Machinery - Collision Warning and Avoidance - Part 1: On-board J1939 Communication Interface.

ISO 1044 : 1993

Industrial Trucks - Lead Acid Traction Batteries - Preferred Voltages.

ISO 4250-1 : 2023

Earth-mover Tyres and Rims - Tyre Designation and Dimensions.

ISO 4250-2 : 2023

Earth-mover Tyres and Rims - Part 2 : Tyre Loads and Inflation Pressures.

ISO 4250-3 : 2020

Earthmover Tyres and Rims - Part 3 : Rims.

ISO 5005 : 1977

Centre of Gravity - Locating - Earthmoving Machinery.

ISO 6302 : 1993

Drain Plugs.

ISO 7000 : 2004

Symbols - Graphical for Use on Equipment.

ISO 8925 : 1989

Diagnostic Ports - Earthmoving Machinery.

ISO 9248 : 1992

Units of Measurement - Dimensions, Performance and Capacities.

ISO 9533 : 2010

Audible Travel Alarms and Forward Horns.

ISO 10261 : 2021

PIN - Product Identification Numbering System.

ISO 10264 : 1990

Starting Systems - Key Locked.

ISO 10266 : 1992

Fluid Systems - Determination of Slope Limits for Operation.

ISO 10532 : 1995

Retrieval Device - Machine Mounted.

ISO 10533 : 1993

Lift Arm Support Devices.

ISO 10570 : 2004

Articulated Frame Lock.

ISO 10987 : 2012

Earthmoving Machinery - Sustainability - Terminology, Sustainability Factors and Reporting.

ISO 10987-2 : 2017

Earthmoving Machinery - Sustainability - Part 2 : Remanufacturing.

ISO 10987-3 : 2017

Earthmoving Machinery - Sustainability - Part 3 : Used Machines.

ISO 11862 : 1993

Auxiliary Starting Aid Electrical Connector.

ISO 16528-1 : 2007

Boilers and Pressure Vessels - Part 1 : Performance Requirements.

ISO 16528-2 : 2007

Boilers and Pressure Vessels - Part 2 : Procedures for Fulfilling the Requirements of ISO 16528-1.

ISO 16714 : 2008

Recyclability and Recoverability - Terminology and Calculation Method.

ISO 16754 : 2008

Earth Moving Machinery - Determination of Average Ground Pressure for Crawler Machines.

ISO 17757 : 2019

Earthmoving Machinery and Mining - Autonomous and Semi-autonomous Machine System Safety.

ISO 21507 : 2010

Fuel Tanks - Non-Metallic - Earthmoving Machinery.

ISO 21815-1 : 2022

Earthmoving Machinery - Collision Warning and Avoidance - Part 1: General Requirements.

ISO 21815-3 : 2023

Earthmoving Machinery - Collision Warning and Avoidance - Part 3 : Risk Area and Risk Level for Forward/Reverse Motion.

ISO 22448 : 2010

Earth-moving Machinery - Anti-theft Systems - Classification and Performance.

prEN 286-1 : 2019

Pressure Vessels - Part 1 : General Purpose (Draft).

prEN 14492-1 : 2015

Cranes - Power Driven Winches and Hoists - Part 1 : Power Driven Winches (Draft).

Regulation (EC) No. 78/2009

Protection of Pedestrians and Other Vulnerable Road Users.

Regulation (EC) No. 661/2009

Type Approval Requirements for the General Safety of Motor Vehicles and their Trailers.

72 documents